BX1200

BX1200 - 1200W BX Series Bass Head The dual mono block and the BX600 mono block bass heads offer rich tone generated from discrete Class A preamps and the extensive equalization features. The EQ starts up front with the contour control going from a flat mid response to a heavy scooped mid response for slap bass players. The 5-band tone control section features three semi-parametric EQ controls and high and low shelving controls. The EQ includes a footswitchable 9 - band Graphic EQ. To warm up the sound, the preamp DRIVE can push the Class A preamps to a slight warm growl. The BX1200 and BX600 provide the ultimate in tone diversity. Technical Specs • Advanced Equalization - three EQ sections • Active Passive front panel input gain switch • 5-band three sweep tone control section • 9-band foot switch able graphic EQ • Single knob silent Optical compressor w/auto limiter • Internal crossover for bi-amp system • Preamp DRIVE and MASTER volume controls • XLR Direct out with Level, ground lift & pre-post preamp controls • Effects loop Switch able by front panel or FS22 footswitch • Tune output jack independent of mute switch. • High current Speakon connectors • RMS 8 ohm 275W/ch, 4 ohm 400W/ch, 2ohm 600W/ch • 8 ohms Bridge 800W, 4 ohms Bridge 1200W • THD less than .03% at 90% output. • Freq. Resp.: 20-20k Hz • Dual speed fan • Active Passive input (-10DB) • 5.7 H x 21.6 W x 12 D 23Lbs.